LED Tape – RGB72

Specifications & Install PDF

LED72

7.2W LED Strip
RGB72 can be used to add dramatic and contrasting colour changing scenes to your project. This strip is controlled using simple hand-held remote or a full DMX system.

Available Options

Colour

RGB

IP Rating

IP20
IP65
IP67
IP68

Voltage

12V
24V

Technical Specification

Ip Rating IP20 IP20 IP65 IP65 IP67 IP68
Voltage 12V DC 24V DC 12V DC 24V DC 12V DC 12V DC
Wattage 7.2W / m 7.2W / m 7.2W / m 7.2W / m 7.2W / m 7.2W / m
Width
10mm
10mm
10mm
10mm
13mm
13mm
Height 2mm 2mm 3mm 3mm 4mm  4mm
LED Chip
5050
5050
5050
5050
5050
5050
LEDs Per Metre 30 30 30 30 30 30
Cutting Increment
100mm
160mm
100mm 160mm 100mm 100mm
Maximum Run Length 5m 10m 5m 10m 5m 5m
Beam Angle 120º 120º 120º 120º
115º
120º
Working Temperature -10ºC to 45ºC -10ºC to 45ºC -10ºC to 45ºC -10ºC to 45ºC
-20ºC to 60ºC
-10ºC to 45ºC
Average Illumination Time
30000 hours
30000 hours
30000 hours
30000 hours
30000 hours
30000 hours
Warranty
2 years 2 years 2 years 2 years 2 years 2 years
Part Code
RGBR1M
RGBR1M-24
RGBR651M RGBR651M-24
RGBRTL671M
RGBR681M

How To Buy

Contact Us

Phone or email us to find the best way to buy our products.

CONTACT US

* DISCLAIMERS
Colour option availability based on IP20 or IP33 version of LED ribbon. IP65, IP67 & IP68 versions may only be available in a limited selection of colour options shown.
Lumen outputs are depicted at the maximum level during testing under optimal conditions. Actual levels may vary depending on a number of external factors.
While we do our best to maintain colour consistency this may vary between batches. When ordering repeat items we cannot guarantee that the item supplied will be from the same batch as previous purchases. All purchases made at the same time will be supplied from LED ribbon of the same batch.
Average illumination times are based on LED chip brightness reduction to 70% of the original brightness under optimal conditions. External factors may decrease illumination lifetime. Illumination time does not reflect the expected wear of other parts used to manufacture the LED ribbon, which are covered by warranty.